The 8PSWT is an eight-position position alarming, homing, bypassing sequential video switcher. Two alarm inputs via rear cage clamp connectors allow homing to camera 4 or camera 8 in a manual mode. Upon release of the alarm inputs, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switches allow instant manual homing, camera bypassing except upon alarm, and auto sequencing mode. There are two separate recessed Dwell pots to control the dwell time of cameras 1-4 and 5-8 independently. The 8PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.
Video Inputs 1VP-P 75 ohm terminated; toggle switch selectable
Toggle Positions ByPass , Sequence and Home
Video Outputs 1VP-P 75 ohms terrminated or unterminated
Dwell Adjust Front panel recessed pot
Dwell Time From approximately .2 seconds to 1 minute
Camera Position 8 Red LED indicators
Power Supply 9-12VDC @ 100 mA
Video In/Out BNC
Power Input DC Coax 2.1mm x 5.5mm
Alarm Input Screw terminal with quick disconnect
Case Beige Metal 10.26” W x 4.90” L x 1.38” H
Weight 1.20kg. (2.64lbs.)
Box Size 14.0” W x 7.0” L x 2.5” H
Enquire about this product
Error: Please select from the options above.