;

4PSWT

Features

Video Inputs 1VP-P 75 ohm terminated; toggle switch selectable
Toggle Positions ByPass , Sequence and Home
Video Outputs 1VP-P 75 ohms terrminated or unterminated
Dwell Adjust Front panel recessed pot
Dwell Time From approximately .2 seconds to 1 minute
Camera Position 4 Red LED indicators
Power Supply 9-12VDC @ 100 mA
Connectors:
Video In/Out BNC
Power Input DC Coax 2.1mm x 5.5mm
Alarm Input Screw terminal with quick disconnect
Mechanical:
Case Beige Metal 5.13” W x 4.90” L x 1.38” H
Weight 0.60kg. (1.32lbs.)
Box Size 8.0” W x 7.0” L x 2.5” H

Zoomed Image
  • 4 P S W T  Thumbnail0

Specifications

The 4PSWT is a four-position alarming homing, by passing sequential video switcher. One alarm input via a rear cage clamp connector allows homing to camerra 4 in a manual mode. Upon release of the alarm input, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switchers allow instant manual homing, camera by passing except upon alarm, and auto sequencing mode. There is a recessed Dwell pot on the front panel to adjust the dwell time from approximately 1 second to 30 seconds. The 4PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.

Features

Video Inputs 1VP-P 75 ohm terminated; toggle switch selectable
Toggle Positions ByPass , Sequence and Home
Video Outputs 1VP-P 75 ohms terrminated or unterminated
Dwell Adjust Front panel recessed pot
Dwell Time From approximately .2 seconds to 1 minute
Camera Position 4 Red LED indicators
Power Supply 9-12VDC @ 100 mA
Connectors:
Video In/Out BNC
Power Input DC Coax 2.1mm x 5.5mm
Alarm Input Screw terminal with quick disconnect
Mechanical:
Case Beige Metal 5.13” W x 4.90” L x 1.38” H
Weight 0.60kg. (1.32lbs.)
Box Size 8.0” W x 7.0” L x 2.5” H

Enquire about this product

 

Enquiry Form

Required fields

 

Where to Buy

Click here for Our Worldwide partners